TARTEK TARBOX

SPECIALLY DESIGNED FOR SULZER APP-PUMP

NOT OPENING SLIDING FACES

The seals have been constructed so that any preusseur variations or dropouts either in product or in seal's fluid sides will not open sliding faces. The sliding faces will not open in the case of vacuum pressure.

SELF ALIGNING FACES

For the seal's long working time it is important that sliding faces are running without swerving. Rotating seal faces are lying on the flexible O-rings so that seal faces are aligning accurately according to the shaft direction.

STRONG CONSTRUCTION

When constructing TARTEK TARBOX, it has been paid special notice to mechanical waring in the end of product side. The strong walls of the seal guarantee longer using time for the seal.

MAINTENANCE

All parts of the seal can be disassembled and assebled by hand. That is why changing sliding faces, springs and O-rings can be done in the workshop and any special assembling equipments is not needed.

In problem cases our maintenance service offers seals' fast repairing.


TECHNICAL SPECIFICATIONS

TARBOX 1
PMAX1,6 MPa
VMAX25 m/s
TMAX125 °C
TARBOX 2
PMAX1,6 MPa
VMAX25 m/s
TMAX180 °C


MATERIAL ALTERNATIVES
Sliding faces O-rings Other parts
SiC/SiC-SiC/SiC
SiC/SiC-SiC/carbon		 FPM, EPDM, NBR
Other materials are available. 		AISI 316, AISI 329
Other parts are available.

back